Description
45/45 Double Euro-Cylinder
Keyed-Alike
The MAXUS 45/45 Double Euro-Cylinder Keyed-Alike is an ideal security solution for office and classroom doors. This double cylinder lock is designed with two keys that can be used to open the lock from both sides. This makes it convenient for classrooms and offices where multiple staff need access to the same door.
The MAXUS 45/45 Double Euro-Cylinder Keyed-Alike is made of high quality materials and features anti-pick and anti-drill protection, making it difficult for intruders to gain access. It can be used on internal and external doors.
This double euro cylinder is easy to install and comes in a variety of sizes that all operate with the same key, allowing you to choose the one that best fits your needs. It’s also available in a ‘dual’ finish, which reduces stock holding and makes it easier to match existing locks on doors.
Overall, the MAXUS 45/45 Double Euro-Cylinder Keyed-Alike is an excellent choice for office and classroom doors as it provides superior security while still being easy to use and install.
Security Features include:
ONE KEY FITS ALL CYLINDERS
- Anti-Snap
- Anti-bump
- Anti-pick
- Anti-drill
- Anti-Pull
- Dual Finish
- Supplied with 3 keys
EURO CYLINDER locks are a common type of lock found in most uPVC and aluminium doors. A euro cylinder lock can be fitted easily without the need for a locksmith and you should be able to obtain one that will fit any door.
DOUBLE CYLINDERS are found on uPVC and classroom doors. Keys can be used to open these double cylinder locks from both sides.
COMMON SECURITY FEATURES
ANTI-DRILL
Stainless steel pins within the cylinder provide anti-drill protection where the steel from the drill bit is softer than the protective metal.
ANTI-SNAP
Anti-snap features help to prevent lock snapping (hammering the lock in a forced entry) but primarily leaves enough of the lock in working order.
ANTI-PICK
Some locks can be picked open using a hair pin or a paperclip. Anti pick locks are designed so that it is almost impossible to open the lock in that way.
ANTI-BUMP
Lock bumping is a technique used to open a lock using a special key to jolt it open. Anti-bump locks have a specially made key and more pins.
FITTING
Euro cylinders have the same dimensions and are easy to install and remove. The actuator in the centre needs to be turned with a key so that it lines up flush with the lock hole and then a screw in the frame of the door holds it in place.
1. Locate and remove the fixing screw on the side edge of the door.
2. Insert the key into one side whilst slowly turning the key to enable you to push the old cylinder out.
3. Measure the overall length of the cylinder and the dimensions either side of the centre hole.
4. With the key in the lock and the cam lined up with the cylinder, insert your new lock.
5. Secure the lock in place with the new fixing screw provided.
It is important to remember that the cylinder has an external and internal side which must be the correct way round when fitting the lock.
The MAXUS 45/45 Double Euro-Cylinder Keyed-Alike is the perfect choice for shopfront and double-glazed doors. It offers a range of features and benefits to ensure maximum security and convenience.
Key Features:
- 6-pin, anti-pick, anti-drill euro cylinder
- Supplied in dual finish to reduce stock holding
- Can be keyed alike or master keyed
- Comes with three keys per lock
- Keys are the same for each lock
Benefits:
- High security against forced entry
- Easy installation with no additional components required
- Convenient access from both sides of the door with thumbturn option available
- Reduced stock holding due to dual finish options
- Same keys for each lock ensures extra convenience
Packaging | Boxed |
A Side / B Side | 45mm / 45mm |
Alias Brand | MAXUS |
Brand | MAXUS |
Barcode | 5055120786100 |
Differs | 1 |
Cylinder Size With Cam | 45/45 |
Cylinder Size Overall | 90mm |
Length | 90mm |
Manufacturer Reference | KMKA/45/45 |
Keys Supplied | 3 |
Guarantee | 1 Year |
Finish | NP/PB Dual Finish |
Keyed | Keyed Alike |
LockDoctor.Biz Ltd is a national supplier of replacement locks and keys for lockers, filing cabinets and office furniture. For the last 20 years we have specialised in replacing lost and broken keys and other security equipment for residential, commercial, and industrial applications, delivered anywhere in the United Kingdom, usually next day.
We are specialists in replacement office furniture keys. Replacement keys are also available next day for desks, pedestals, tambour units, filing cabinets and cupboards. If you are not sure that this is the correct type of key for you, just email a picture of your lock face or the original key to sales@lockdoctor.biz and we will help.
We cut these keys using the latest electronic and semi-automatic machines. Keys are cut according to the manufacturers’ own code with precision and effectively the same quality as an original key. The key blanks we use are best quality full-steel and manufactured specially for us.
We process orders for hundreds of locks within a few hours. Small orders are usually dispatched immediately within the hour.
Reviews
There are no reviews yet.